Luxury Vinyl Plank Flooring in Memphis, Tennessee
What it costs, and what Memphis's housing stock does to the job.
Luxury vinyl plank in a 1970-median city
The median Memphis home was built in 1970 and 7.7% of the city’s housing predates 1940. For luxury vinyl plank specifically, that is not background color — it is the thing that decides the job.
The pragmatic answer in a humid older house, because it does not respond to the crawl space at all. Over an old plank subfloor it still wants an underlayment so it does not telegraph every gap, but it will not cup, and in West and East Tennessee that is worth a great deal.
Memphis has the oldest median in this set at 1970, with 7.7% predating 1940 and real prewar housing near the core. It also sits in the most humid corner of the state, which makes crawl space moisture the dominant flooring risk here rather than anything about the subfloor itself.
What it costs in Memphis
Memphis / West TN labor runs below the Tennessee baseline, which is why the range below sits under the statewide $2–$12. Installed, materials and labor together:
| Work | Memphis range | Tennessee range |
|---|---|---|
| Luxury vinyl plank, installed | $2 – $11.5 a square foot | $2 – $12 a square foot |
An estimate, not a quote. These are planning ranges for Tennessee, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a Memphis job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 7.7% of Memphis homes predate 1940 and the median build year is 1970, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the crawl space read, and what did the boards read? An installer who measured both has told you more than a license could. When licensing actually applies.